Calfee Design is dedicated to the efforts of DIY builders in their quest to be informed and produce the best results possible for their project

Cable Stop Guide for Bamboo

Cable stop are small parts that attach to the frame and hold the cable housing. They are glued on and screwed through the wrapping. View the PDF
Cable Stop
Cable Stop Screw

Instruction for Building a Concrete Table

Concrete Table

A flat table is key to building straight frames. Melamine chip board is fine for awhile but it will eventually warp, especially if left outside. Build a long lasting, warp-proof flat table out of reinforced concrete with a poured epoxy surface. Find a mostly flat floor to work on. Lay down a strong plastic sheet (Visqueen) that’s at least 4 mils thick. View the PDF

Calfee Design 1-800-965-2171